Roofing Installation Is a Difficult Job That Requires the Expertise of a Roofing Contractor

Roofing is not the most exciting home project, but it’s essential to get it right. If not, leaks and other structural damage can result.


Make sure to hire an experienced, licensed roofer. Check their experience, insurance coverage, and reputation. You should also remove children and pets from the work area, as they may be injured by falling debris or tools. To learn more, visit

The first thing a roofing contractor will do is walk around your home to determine the condition of your roof. Then, he will explain your options. Whether you want dimensional shingles for added curb appeal, three-tabs for savings, wood shakes for natural charm or metal sheeting for durability, the roofer will help you choose the best material for your home.

Once you’ve selected the roofing material, you’ll need to prepare your house for the re-roofing process. The pounding of hammers and nail guns will create vibrations throughout your home that can damage wall-hung decorations, especially on the top floor. Take down mirrors, pictures and wreaths ahead of time. Consider covering delicate mementos and knick-knacks with a drop cloth or moving them to a safer location. Be sure to cover air vents, light fixtures and ceiling penetrations with tarps and drop cloths as well.

If your roof has valleys, it’s important to have them waterproofed as well. Water runs through these areas and can cause leaks. The roofer will use a special coating to seal them, adding extra protection.

Next, the underlayment will be installed. This layer will protect your home from moisture and provide a base for the new roofing materials. Then, the shingle is put into place. If you’ve chosen asphalt shingles, the shingle is nailed down with a special tool. Metal flashing is then installed to seal the chimney, joints and other areas of the roof where water might seep in.

During this stage, your roofing contractor will remove any debris and dispose of it. He will also sweep the yard and clean off gutters, removing any stray shingles that might fall. He will also check for any electrical wires that are strung up and over the rafters and mark them as necessary. Electrical wires that are not properly marked pose a fire hazard and should be addressed by a licensed electrician.

Finally, it’s a good idea to move any outdoor toys and furniture to a shed or garage. Roofing contractors will need to access the roof from different sides of your house and may trip over objects in your yard. In addition, shingle pieces and other debris might fall onto plants or snag trees.


Whether you’re replacing an existing roof or installing a new one, the installation process is complex and requires the expertise of a professional roofing contractor. The first step is inspecting the existing roof deck for damage and rot, then planning the layout of the new roof materials.

Once the underlayment is installed, the roofing contractor can begin installing the shingles. They’ll start at the bottom and work their way up, carefully laying each shingle. To ensure a watertight seal, the shingles are secured with a special adhesive strip and sealed with a large bead of roof cement.

During the installation process, the roofer will add any necessary vents or plumbing pipes for the attic space, and install hip and ridge shingles to give the roof a finished look and additional protection from weather elements. They’ll also paint the pipes and vents to match the color of your shingles and create a seamless appearance. If you’re re-roofing your home, this step can greatly increase its value by making it more appealing to potential buyers. *Interest is billed during promo period but will be waived if the amount financed is paid in full before promo ends.


Roofing installation is a difficult job and it’s best left to professionals who have the necessary tools and equipment. The roofer will begin the project by inspecting the existing structure to ensure that it can support a new roof. He will then plan the work, including choosing appropriate materials and determining quantities. The shingle underlayment will be installed in rows and fastened using a pattern that includes close nails near the edge of the underlayment, with nail spacing becoming wider as it moves towards the center. The final step is to add the shingles and finish off any vents or roofing pipes that need covering.


It’s important to keep open communication with your roofing contractor throughout the process. This helps to ease concerns and prevent surprises. It’s also a good idea to trim any tree limbs that hang over your roof. This helps to minimize damage in the event of a storm and it keeps debris from building up on your roof.

Once the new shingles are installed, your roofer will inspect and clear away all loose or damaged pieces. They will also examine the flashing, which is a strip of metal (usually galvanized steel) installed to direct water away from joints in the roof, such as those around chimneys, vents, and dormers. If your flashing is damaged, it will be replaced with high-quality material to protect against water seepage.

Then, your roofer will replace any vents or skylights and paint any exposed metal pieces to match the color of the new shingles. This ensures that they blend in seamlessly with your new roof and don’t stand out for an unattractive reason. They will also look for any signs of mold or rot and treat any problem areas as needed. They will also sweep and vacuum the chimney to remove a soot-like substance called creosote, as well as look for any large accessories like skylights, vents, and chimneys that need attention. All of this is done to ensure that the roof and property are protected and meticulously cleaned up after the roof replacement is complete.

Ronald Glover